Wholesale price stable quality Siway SV-602 Epoxy Structural Adhesive A/B to Lesotho Importers
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We always work as a tangible team to ensure that we can provide you with the best quality and the best price for Wholesale price stable quality Siway SV-602 Epoxy Structural Adhesive A/B to Lesotho Importers, Our company will continue to adhere to the " superior quality, reputable, the user first " principle wholeheartedly. We warmly welcome friends from all walks of life to visit and give guidance, work together and create a brilliant future!
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
After our extended snowbird trip down south I like to go over our Cougar fifth wheel trailer with a fine tooth comb looking for defects. This spring I discovered a small leaky seal in one corner of the slide out room. Luckily it hadn’t had a chance to progress too far. Still, though, it had weakened a small area of the floorboard.
I found the leak was caused by a small opening in the external silicone sealant. Silicone caulking will dry out over time leaving openings for water to penetrate. Water had seeped in over time and wetted the floor board making it a bit spongy. Given enough time I’m sure it would have rotted away completely and led to a structural failure of the slide room. Glad I caught it early!
To repair the problem, I first removed the external flange and scraped away the old silicone caulk using a plastic chisel, scotch pad, and my thumbnail. To help loosen up the old caulking, I use a product called “Goo Gone Caulk Remover.” With around a 1/2 hour of effort, I was able to get rid of pretty well all the old silicone. Extremely important as nothing will stick to silicone.
Next, I drove several 1 1/4 inch Teks Screws through the affected board area and into an aluminum beam above it. I made sure the screw was countersunk into the wood as not to catch when the slide is drawn in.
Finally, I reattached the flange and resealed it with a product called SikaFlex 290, a high-end marine grade sealant. I smoothed out the SikaFlex and made a smooth seam using a special caulking tool. The tool comes with multi-sized flexible trowls. Then cleaned up the overflow bits and let cure.
———————————–
Follow our RVing adventures at https://www.loveyourrv.com and https://rvhappyhour.com
Connect with Love Your RV!
Pinterest ► https://www.pinterest.com/loveyourrv
Google+ ► https://plus.google.com/+LoveYourRVonGPLUS
Facebook ► https://www.facebook.com/LoveYourRV
Twitter ► https://twitter.com/loveyourrv
Blog Feed ► https://feeds.feedburner.com/LoveYourRV
Monthly Newsletter ► https://www.loveyourrv.com/mailing-list-sign-up/
Don’t forget to Subscribe! ► https://www.youtube.com/subscription_center?add_user=LoveYourRV
Lamination machine is laminated neoprene rubber with many different kinds of fabrics by glue to completed Neoprene Fabric for various applications.
We are a Neoprene Fabric and Sport Products Manufacturer.
Welcome to Contact US!
WhatsApp/Phone: +8617731682407
Skype: helen.neoprene
WeChat: +8615620622681
Email: helen@uooindustry.com
Website: www.neoprenefabric.org www.uoosport.com
