Subscribe for new videos and visit https://www.reddevil.com/ to see our products.
RED DEVIL FOAM & FILL WINDOW & DOOR
• APPROVED SPECIFICALLY FOR SEALING AROUND WINDOWS & DOORS
• FILLS, INSULATES AND SEALS AROUND WINDOWS AND DOORS
• ELIMINATES WINDOW AND DOOR FRAME BOWING
• STOPS ENERGY LOSS
• MORE EFFICIENT THAN FIBERGLASS
• MULTI-DIRECTIONAL DISPENSING
Red Devil Window and Door Polyurethane Straw Foam Sealant is specifically formulated for filling, insulating and sealing around windows and doors. Innovative low pressure and expansion formula eliminates the chance of bowing and provides a full cavity fill. Takes the shape of all cavities forming a permanent, airtight and waterproof seal on wood, metal, masonry, glass and most plastics. It stop air infiltration and in turn prevents heat loss and drafts. It is environmentally safe, contains no CFCs.
It is UL listed and an AAMA (American Architectural Manufacturers Association) Verified Component.
USE AROUND: Window and Door Frames, Pipes, Electrical Outlets, Vents and Foundations.
NOT RECOMMENDED FOR FILLING ENCLOSED CAVITIES. DO NOT USE BETWEEN WALLS AND UNDER TUB SURROUNDS.
DIRECTIONS:
Clean the surface from oil, dust and greases. For best results and maximum yield apply at temperatures 41°F-86°F. Use below 41°F is not recommend. Protect the area to be sprayed with cloth or newspaper.
Shake the can vigorously for 30-45 seconds and screw trigger and straw assembly onto valve.
Fill cavities partially as foam will expand – do no overfill. Do not apply partially as foam will expand – do not overfill. Do not apply into spaces with inadequate moisture and humidity.
Trim cured excess foam with sharp knife. Cured foam can be cut, sanded or painted. Cured foam discolors, and loses its stability and properties when exposed to UV light. Paint or coat foam for best results not before 24 hours after application.
o Clean up: uncured foam – clean immediately with nail polish remover, acetone or paint thinner.
o Clean up: cured foam – cured foam cannot be removed with solvents. Cured foam can be removed from skin using an industrial cleaner with pumice or petroleum jelly. Cured foam will wear away over time and is not harmful to health.
CAUTION: HARMFUL, FLAMMABLE GAS.
Post time: Jun-27-2017