Top Quality SV-777 silicone sealant for stone for Mauritius Manufacturer
Short Description:
Description SV-777 silicone sealant for stone, is an elastomer sealant in modulus, single. Waterproof joints need to be sensitive to natural stone, glass and metal building clean appearance panel for sealing design, it to the moisture in the air after curing in contact, the formation of elastic rubber sealing performance, durability, weather resistance, good combination with most building materials. Key Features 1. 100% silicone 2. Minimized fluid migration 3. Low dirt pick up 4. Water &...
We are also focusing on improving the stuff management and QC system so that we could keep great advantage in the fiercely-competitive business for Top Quality SV-777 silicone sealant for stone for Mauritius Manufacturer, We are confident to make great achievements in the future. We are looking forward to becoming one of your most reliable suppliers.
Description
SV-777 silicone sealant for stone, is an elastomer sealant in modulus, single. Waterproof joints need to be sensitive to natural stone, glass and metal building clean appearance panel for sealing design, it to the moisture in the air after curing in contact, the formation of elastic rubber sealing performance, durability, weather resistance, good combination with most building materials.
Key Features
1. 100% silicone
2. Minimized fluid migration
3. Low dirt pick up
4. Water & weatherproof
5. Primerless adhesion to most building materials
6. 25% movement capability
Basic Application
1.Stone curtain wall sealing
2.Engineering ceramic sealing
3.Stone and other materials such as glass, metal seam sealing
4.Other uses
Technical data sheet
| Test standard | Test project | Unit | value |
| Before curing——25℃，50%R.H. | |||
| ASTM C 679 | Flow, sagging or vertical flow | mm | 0 |
| VOC | g/L | ＜80 | |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 30 |
| Curing time（25℃，50%R.H.） | Day | 7-14 | |
| Sealant curing speed and operating time will have different with different temperatures and temperature, high temperature and high humidity can make sealant curing speed faster, rather low temperature and low humidity are slower.21 days after curing——25℃，50%R.H. | |||
| GB13477 | Durometer Hardness | Shore A | 30 |
| GB13477 | The ultimate tensile strength | Mpa | 0.7 |
| Temperature stability | ℃ | -50~+150 | |
| GB13477 | Movement capability | % | 25 |
| ASTM C 1248 | Pollution / oil, natural stone | No | |
Certification
25HM GB/T 23261-2009；ASTM C920-2011
Color
Black，White，Gray
Package
300ml in cartridge * 24 per box, 590ml in sausage *20 per box
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
https://www.sincosilicone.com
info@sincosilicone.com
a high quality producer of custom molded Silicone rubber products and has more … KDL is constantly working to reach the highest standard of production and …
After our extended snowbird trip down south I like to go over our Cougar fifth wheel trailer with a fine tooth comb looking for defects. This spring I discovered a small leaky seal in one corner of the slide out room. Luckily it hadn’t had a chance to progress too far. Still, though, it had weakened a small area of the floorboard.
I found the leak was caused by a small opening in the external silicone sealant. Silicone caulking will dry out over time leaving openings for water to penetrate. Water had seeped in over time and wetted the floor board making it a bit spongy. Given enough time I’m sure it would have rotted away completely and led to a structural failure of the slide room. Glad I caught it early!
To repair the problem, I first removed the external flange and scraped away the old silicone caulk using a plastic chisel, scotch pad, and my thumbnail. To help loosen up the old caulking, I use a product called “Goo Gone Caulk Remover.” With around a 1/2 hour of effort, I was able to get rid of pretty well all the old silicone. Extremely important as nothing will stick to silicone.
Next, I drove several 1 1/4 inch Teks Screws through the affected board area and into an aluminum beam above it. I made sure the screw was countersunk into the wood as not to catch when the slide is drawn in.
Finally, I reattached the flange and resealed it with a product called SikaFlex 290, a high-end marine grade sealant. I smoothed out the SikaFlex and made a smooth seam using a special caulking tool. The tool comes with multi-sized flexible trowls. Then cleaned up the overflow bits and let cure.
———————————–
Follow our RVing adventures at https://www.loveyourrv.com and https://rvhappyhour.com
Connect with Love Your RV!
Pinterest ► https://www.pinterest.com/loveyourrv
Google+ ► https://plus.google.com/+LoveYourRVonGPLUS
Facebook ► https://www.facebook.com/LoveYourRV
Twitter ► https://twitter.com/loveyourrv
Blog Feed ► https://feeds.feedburner.com/LoveYourRV
Monthly Newsletter ► https://www.loveyourrv.com/mailing-list-sign-up/
Don’t forget to Subscribe! ► https://www.youtube.com/subscription_center?add_user=LoveYourRV
