Special Design for SV-8890 Two-component Silicone Structural Glazing Sealant for Kenya Manufacturer
Short Description:
Description SV8890 is neutral curing, designed for glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal designed silicone sealant structure, excellent bonding performance of structure and the weathering resistance, after artificial accelerated weathering test, various physical and chemical properties have no obvious change in the sealant. When using, SV8890 with dedicated two-component glue machine constructi...
Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for Special Design for SV-8890 Two-component Silicone Structural Glazing Sealant for Kenya Manufacturer, For further information, please do not hesitate to contact us. All inquiries from you will be highly appreciated.
Description
SV8890 is neutral curing, designed for glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal designed silicone sealant structure, excellent bonding performance of structure and the weathering resistance, after artificial accelerated weathering test, various physical and chemical properties have no obvious change in the sealant. When using, SV8890 with dedicated two-component glue machine construction, two kinds of components in accordance with the provisions, mixing ratio after curing form elastomer.
Key Features
1. None sag
2. Adjustable working time
3. Excellent adhesion to most building substrates
4. High bonding strength and modulus
5.12.5%movement capability
6. Silicone durability
Basic Application
1.Glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal;
2.Insulating Glass of the second seal
3.Many other building and industrial applications
Technical data sheet
| Test project | Unit | value |
| Flow, sagging or vertical flow | mm | 0 |
| Operating time | min | 20 |
| surface drying time（25℃，50%R.H.） | min | 40-60 |
| Durometer Hardness | Shore A | 20-60 |
| At 23 ℃ maximum tensile strength elongation | % | ≥100 |
| Tensile strength（23℃） | Mpa | 0.9 |
| Tensile strength（90℃） | Mpa | 0.68 |
| Tensile strength（-30℃） | Mpa | 0.68 |
| Tensile strength（flooding） | Mpa | 0.68 |
| Tensile strength（flooding – ultraviolet） | Mpa | 0.68 |
| Bond damage area | % | 5 |
| Thermal aging（thermal weight loss） | % | ≤5 |
| Thermal aging（crack） | No | |
| Thermal aging（efflorescence） | No |
Certification
GB 16776
Color
Component A(Base) – White, Component B(Catalyst)- Black
Package
1. Component A(Base): (190L), Component B(Catalyst) (18.5L)
2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Jeep Liberty Water Pump Replace. This is a 2003 Jeep Liberty Sport with a 3.7 engine , that has a bad water pump.The serpentine belt was already taken off the jeep liberty so we could load the jeep up on the trailer. You will need to drain the rest of the jeeps antifreeze out and you can either take the bottom radiator hose off to drain . There may be a drain plug in the jeep liberty radiator but i did not look, the hose was right there.To get the water pump off the jeep liberty you will need to remove the idler pulley.. Then the water pump can be removed from the jeep liberty ,by removing the bolts from the water pump. the 3.7 jeep liberty water pump is not to hard to do compared to many other vehicles. Clean the surface that the water pump will seal on the 3.7 block. Then just reverse the steps to reinstall the water pump on the 3.7 jeep liberty.
Due to G+ Allowing links to be posted and I do not have time to make sure all links are safe ,ANY post with a link in it will be deleted. Sorry. .
car repair
