Personlized Products Siway SV-602 Epoxy Structural Adhesive A/B for Lithuania Manufacturers
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Personlized Products Siway SV-602 Epoxy Structural Adhesive A/B for Lithuania Manufacturers, Our professional technical team will be wholeheartedly at your service. We sincerely welcome you to visit our website and company and send us your inquiry.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
This video shows the standard maintenance process to change the transmission fluid and filter on a Dodge Caravan. We remove the transmission pan, drain the fluid, install a new filter, put it all back together and add the new fluid. There are a few tips and tricks to make the job easier and it’s all condensed into a short video to make it easy to review before you start on your own vehicle.
The parts used in the video cost about $40 at the local Autozone as of January 2013 and the job doesn’t take very long at all (an hour or so total time). People sometimes fear working on an automatic transmission, but you can see in the video that this is a simple job and there is no need to let this job go undone or to overpay for something you can do yourself.
Tools needed are:
- 10mm socket with a 3″ or 6″ extension
- 1″ putty knife (optional)
- deadblow hammer (optional)
- Some sort of catch pan (to collect the old fluid)
- jack stands, ramps, a vehicle lift, or some other way to lift the vehicle up a bit helps out a lot. You can also pull one wheel of the vehicle up on a curb to give some extra space in a real pinch.
- a gasket scraper (in the video, we use a glass scraping razor-blade)
- a funnel with a very narrow spout
- shop towels for cleanup
- torque wrench (that measures in inch-pounds) if you don’t have a torque wrench, this job is still doable, but you may have a harder time getting the pan to be leak free and you run the risk of stripping bolts or warping the pan
Parts to get from the parts store:
- (1) new filter/gasket set (as low as $9.99)
- (5) quarts of ATF+4 transmission fluid (as low as $5.99 each)
- (1) roll of shop towels or (1) bag of rags (as needed)
- (1) drain pan (as needed)
- (1) narrow funnel (as needed)
Good luck, and have fun!
STEP 2:
Waterproofing cracks on concrete roof with an elastomeric polyurethane sealant.
For more information on sustainable waterproofing for concrete roofs visit:
https://bullbondpr.com/impermeabilizacionsustentableentechosdeconcreto/
PASO 2:
Impermeabilización de grietas en techo de concreto con sellante elastomérico de poliuretano.
Para más Información sobre impermeabilización sustentable en techos de concreto visite:
https://bullbondpr.com/impermeabilizacionsustentableentechosdeconcreto/
