OEM/ODM Supplier for Siway MG PU FOAM Export to America

With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for OEM/ODM Supplier for Siway MG PU FOAM Export to America, We warmly welcome your participation based on mutual benefits in the near future.

Description

MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;

Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;

Key Features

1. Noise silencing effect

2. Strong bonding strength

3. Water & weatherproof

4. Primerless adhesion to most building materials

Basic Application

1.Doors and Windows and wall body between the gap filling sealing, fixed bond

2.Language lab, studio, etc when decorating, gap to fill

Technical data sheet

Certification

JC 936-2004

Color

White

Package

750ml in Bottle * 12 per box

Shelf life

12 months

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

How To Dash Repairs Cover DIY Installation Tips https://www.1OwnerCarGuy.com This is a video of this really cool and rare 94 Nissan 240SX Limited Edition Convertible that I had and the dash was cracked up and didn’t look good. So I decided to go ahead and get a dash cover for it. This is just kind of showing you the process and showing you a before and after and how easy it can be to upgraded the looks of your car. It really is easy and I really enjoy it. Thank You for watching and please Share my Videos Comment on the Like them and Make sure you are Subscribed..;-)

Cheers
Nathan Wratislaw AKA 1 Owner Car Guy

Here is the Soda Steam link Free Shipping and $10 off https://www.stockgambles.com/stock-gambles-blog.html

Make sure and check Out My channel I have Lots of 1 & 2 Owner Cars Trucks and SUV’s on there and I sell them Cheap Also If You Subscribe You won’t Miss out..;-) I Have a few Channels You can Access them Via My Main Channel page or also you can See the Links I post Below I will Also Post links to My websites and Facebook so you don’t Miss any of the action Sign Up Everywhere!!..;-)

Cheers

Nathan Wratislaw AKA 1 Owner Car Guy
406-544-6919

Make sure and visit Some of My Websites Below I do All Sorts of Unique Things..;-)

https://www.1ownercarguy.com

https://www.cerealmarshmallows.com

https://www.Beaglespocket.com

https://www.ClickWebs.com

https://www.Hardener.com

https://www.missoulaautoauction.com

https://www.vita-depot.com

https://www.Nathanwratislaw.com

Also Make Sure And ADD Me or Subscribe on Facebook & Youtube

https://www.facebook.com/cerealmarshmallows

And For Youtube I have 2 channels you may want to add

https://www.youtube.com/user/cerealmarshmallows

https://www.youtube.com/user/1ownercarguy

https://www.youtube.com/user/MovieCarsGuy

https://www.youtube.com/user/MiniatureBeagles

https://www.youtube.com/user/stockgambles

https://www.youtube.com/user/montanamuscle

Send Me Hate Mail or Goodies & Stuff to show on Youtube

1 Owner Car Guy (Nathan Wratislaw)
PO Box 2505
Lakeside, CA 92040
No Ticking items please..;-)

“Dash Repair” “Cracked Dash” “Dashboard Repair” “Dash Cap” “Dash Cap Install” “DIY Dash Repair” Dash “Dash Repairs” “Dash Cover” “Dash Cover Installation” “Installation Tips” Tips DIY Repair Repairs “Do It Yourself” “DIY Video” “Instructional Video” “Nathan Wratislaw” “1 Owner Car Guy” Cover “How To”

Turning the 3d printer to change the filament is kind of a pain, so I made a way to spin it, and store filament and tools!
Subscribe to my channel: https://bit.ly/1k8msFr

MORE PROJECTS, POSTS AND EVENTS

https://www.iliketomakestuff.com

GET MORE INFO ON THIS PROJECT:

https://www.iliketomakestuff.com/make-spinning-3d-printer-workstation

HERE’S WHAT YOU’LL NEED:
https://amzn.to/1NCVmAb – SawStop cabinet saw
https://amzn.to/1GMrfGL – Dewalt 20v drill driver combo
https://amzn.to/1HdQuwD – Grizzly G0555LANV Bandsaw
https://amzn.to/1GyGjbg – Grizzly Drill Press
https://amzn.to/1ntzLSF – Silicone spray
https://amzn.to/1ntzEGI – 12″ lazy susan bearing
https://amzn.to/1WnkyhQ – Pancake compressor/ brad nailer combo
https://amzn.to/1LZGfxW – Ultimaker 2 Extended 3D printer

Want to support ILTMS? Get early viewing, exclusive content and more…

https://www.iliketomakestuff.com/patreon

BUY A SHIRT, STICKER, PENCILS and MORE!!

https://www.iliketomakestuff.com/store

FOLLOW:

https://twitter.com/iliketomakestuf

https://instagram.com/iliketomakestuff

https://facebook.com/iltms

I used scrap plywood for this project, so it was a combination of 1/2″, 3/4″ plywood and MDF.
I cut down three pieces to 14 3/4″ squares, as this was a little larger than the footprint of my printer.
I cut a couple of strips for the side panels. These were a little taller than the diameter of a filament roll.
On one of these pieces, I centered a filament roll and traced the inner circle.
I made a mark at the far outside of the circle, and drew in a place for a 1/2″ dowel hole.
I lined the two pieces up and drilled a 1/2″ hole through both.
I sat the side pieces in place on the base and traced the edge. This shows me the safe area to drill holes. I did the same for the other square piece.
On both pieces, I drilled countersunk holes in the safe area.
The side pieces got glue on one side before being screwed to the bottom square.
I mistakenly glued the top at this point too, but don’t do that. Just screw it on.
I tested the spacing with a roll of filament hanging on the dowel rod.
I cut another scrap that fit within the open side of the box, to act as a drawer front.
Two pieces were cut down to act as the sides of the drawer. Their depth was about the depth of the box minus the diameter of the filament roll.
I sat the side panel on the side of the box and pivoted it off the bottom front edge. I made a mark on the side panel where I wanted it to hit the box top.
Using a straight edge, I drew a line from my mark to the opposite top corner.
With both side pieces taped together, I cut along my line on the bandsaw.
I trimmed a piece, for the back, down to the same height as the back side of the side panels.
Since I was out of plywood scrap, I cut the drawer bottom from MDF.
I applied glue to all of the surfaces that would touch.
I folded the pieces up into place and used some brad nails to hold everything in place while the glue dried.
Using a spacer (scrap), I marked the location for two hinges on the front, bottom edge.
I predrilled holes for the hinges, and screwed them in.
I held the drawer in place, upside down, to align and screw in the hinges.
I flipped the drawer up into place. It was tighter than I wanted, but fit correctly.
I sanded down the rough edges and the sides of the drawer where it touched the outer box.
I applied some paste wax to the areas that touched which made the drawer move very smoothly!
I 3d printed a quick knob (but any knob would work fine).
Using a very small bit, I drilled a hole right in the center of the drawer front.
I ran a screw in from the back side directly into the back of the knob to hold it in place.
I sat the printer in place, centered on the top of the box, and nailed on some small strips along the side of it, keeping them very snug to the printer.
On the base panel, I measured a lazy susan bearing, and found the difference in the base’s width and the bearings diameter. I split the difference and marked in that distance from each edge.

Having these four marks allowed me to easily center the bearing on the base.
The two parts of the bearing got lined up so you could see a hole all of the way through. I marked these (4) holes onto the base.
Each hole got drilled, with a countersink bit.
I centered the bearing the same way on the bottom of the cabinet, but screwed it in place using the four inner holes.
The bearing comes un-lubricated, so I sprayed in a little silicone spray and worked it into the bearing.
Laying the base on top of the bearing, I aligned the holes using a drill bit and my ice pick.
I drove in screws, through the base, into the bearing holes. These are small holes made to be grabbed by sheet metal screws.
I flipped the whole thing over and took it for a spin (pun intended).
I was able to fit four rolls of filament on the 7/16″ dowel.
I added all of the 3d printing tools to the drawer and put it in place in my office.
Now I can easily spin the machine to swap filaments! Second channel: bit.ly/iltms-2