Lowest Price for SV-312 Polyurethane Sealant for Windshield Glazing Export to Croatia
Short Description:
Description SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair. It allows a drive away time of 6 hours in vehicles with or without airbag. *Providing the ambient temperature is at least 23°C and relative humidity 50 %. At lower temperatures and humidities drive away time will be...
We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Lowest Price for SV-312 Polyurethane Sealant for Windshield Glazing Export to Croatia, We are glad that we are steadily growing with the active and long term support of our satisfied customers !
Description
SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.
It allows a drive away time of 6 hours in vehicles with or without airbag.
*Providing the ambient temperature is at least 23°C and relative humidity 50 %.
At lower temperatures and humidities drive away time will be longer.
Where to use
Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.
Key Features
a. Fast curing under room temperature, no sagging, solvent free
b. High bonding strength,
c. Good chemical and water resistance
d. No conductive
e. Excellent noise, vibration and impaction resistance
f. Automotive OEM quality
Technical data sheet
| Test standard | Test project | Unit | value |
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 30 |
| Curing speed | mm/24h | 3 | |
| GB/T 531.1-2008 | Durometer Hardness | Shore A | 45 |
| GB/T 2793 | Non-volatile components | % | ≥96 |
| GB/T 528 | The tensile strength | Mpa | 2.5Mpa |
| GB/T 528 | Elongation at break | % | ≥400% |
| GB/T 528 | Tear strength | N/mm | ≥5.0 |
Color
White, black, grey
Package
300ml plastic cartridges and 600ml in sausage
Shelf life
9 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
I think the well system made of Duct Seal is the best for installing a transducer on a kayak hull. (thru-hull).
I is easy to make, easy to undo or redo. No tools are required at all. No sanding no heavy cleaning required at all. It is the cheapest and the fastest. There is no waiting time. You make it and go fish.
Though, I found that gluing the transducer on the hull, regardless of glue types (including Duct Seal), is not quite dependable. Because there is an inherent problem that is air pockets or air bubbles form between the hull and the transducer.
Build a well for the transducer and fill the well with water is the best way to achieve consistent and accurate readings for a long period of time.
On the video, I explained and demonstrated why a transducer well made of Duct Seal is the best way for installing a transducer on a kayak hull.
Joe
As seen at https://www.photopaperdirect.com/categories/Creative-Paper/Fixative-Varnish-Spray/?utm_source=youtube.com&utm_medium=social&utm_campaign=sales&utm_content=fixative_spray&utm_term=PPD Review of the Inkjet fixative spray. The varnish spray comes in three finishes, matt, satin and glossy. By applying the spray in images, phones and so on, the media becomes water prof and better immune to UV light.
