Low price for Siway SV-602 Epoxy Structural Adhesive A/B for Chile Factories
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Low price for Siway SV-602 Epoxy Structural Adhesive A/B for Chile Factories, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
X8R Ltd www.x8r.co.uk
The problem
The OEM seal on the base of the aerial deteriorates and fails.
The OEM seal on the base of the aerial of most vehicles is made from a poor quality rubber, this deteriorates over time causing the seal / gasket to crack, discolour and perish, ruining the aesthetics of the part and the sealing function. Often these can fail to the extent that the seal is lost or only semi intact. Failure of the sealing function of the base gasket can also in some cases lead to leaks within the cabin of the vehicle. It is extremely rare that the unit cannot be overhauled to restore function.
Symptoms of fault
It is easy to diagnose this fault by inspecting the base of the aerial; it is often evident visually if the seal is failing. It is not totally uncommon for the outside of the seal to appear intact but for the seal to be failing to prevent water ingress, this will be evident by water in the vehicle cabin around the interior light or headlining.
Vehicles affected
Our seal will fit many vehicles, it is impossible for us to list for all vehicles that our item will fit or to test on all vehicles. .
This item is a universal item and will fit many vehicles. The gasket is oval in shape; with external dimensions of 60mm by 43mm approximately. Internally 50 mm by 40 mm. The rubber is flexible and stretchable so some variation/tolerance is possible. Please measure your existing base before ordering to ensure suitability.
The solution
Install our replacement base gasket seal and restore the appearance and sealing function of the aerial base gasket.
Our replacement seal can be fitted easily to restore the appearance of your aerial. Also stopping any water ingress in to the vehicle cabin. An ideal replacement to your cracked, worn, discoloured or generally aged antenna base gasket seal. Our item allows you to replace just the seal that fails without the need to replace the whole antenna base at vast expense from the vehicle manufacturer, saving money and time. Other seals will have a larger footprint so cannot be fitted in situe so the whole aerial has to be removed which is a tricky job. Our improved design seal is specifically designed to be installed from outside the vehicle, saving the labour of removing the interior trim to remove the complete aerial base to replace the seal. Our seal can be replaced in situe making the job far easier. Please check out our video showing this simple process. Our seal can be flexed in to position to seal the base of the gasket between the aerial base and the vehicles roof providing a perfect seal.
I use the can to inflate a flat tire I had on a road trip. From the creators of Slime, Quick Spair is the premier inflator and sealer. It seals punctures and inflates in seconds. You can find Quick Spair on Amazon (affiliate link): https://amzn.to/2sGSFIt
Quick Spair seals punctures up to 3/16″ and inflates the tire without the need for a jack, spare tire or any tools, allowing you to get off the road and to a service station where an approved repair can be made. Seals and Inflates in Seconds, Hose Top Works on All Wheels, Tire Sensor Safe, Easy and Safe to Use, No Jacks or Tools Needed, Cleans up easily with water, Non Flammable Formula. Quick Spair is a temporary repair, An approved RMA (Rubber Manufacturer’s Association) repair is recommended with 3 days or 100 miles.
To use Quick Spair, simply remove the valve cap, attach the hose and press the green button. In just seconds, the puncture is sealed and the tire is inflated. Quick Spair is non-flammable and cleans out of the tire with water, making a professional repair possible.
Repairs punctures and inflates in seconds. Great for slow leaks.
