High Efficiency Factory Siway SV-602 Epoxy Structural Adhesive A/B to Japan Factories
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
It adheres to the tenet "Honest, industrious, enterprising, innovative" to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand for High Efficiency Factory Siway SV-602 Epoxy Structural Adhesive A/B to Japan Factories, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Terry talks about Tyvek which is a rain shield that protects the house from moisture. When water goes through a homes siding, it hypothetically hits this barrier and runs down to the ground. Terry further notes that the rain shield does not provide air sealing; instead, all the air sealing is already taking place behind the Tyvek in the polyisocyanurate foam, OSB, and behind the OSB where the spray foam has been applied.
Furring strips are put over the Tyvek, so that when siding is placed over it, there is an air space between the siding and rain shield. In other words, air can circulate beneath the siding to dry it out if it gets too wet thus avoiding a possibility of deterioration. The window trim is then put up on top of the furring strips. A bug screen is then applied on top and bottom of the furring strips and Tyvek. The siding, fiber cement Hardie board, is finally put on. The practice of putting on furring strips on top of the rain shield is different from traditional building where this step is skipped; instead, the siding is put right on top of the rain shield.
Fenform Bladder Moulding by Fenner Precision https://www.fennerprecision.com
Bladder Moulding. Hoses made from uncured silicone sheeting are used to manufacture composite ducts.
Fenner Precision’s uncured material is cut to shape and placed in the male and female moulds. The mould is assembled and placed in an oven where pressure is applied. Fenner Precision’s silicone material is cured to take the shape of the mould. A re-usable silicone bladder is formed. Pre-preg material is placed in the male and female moulds and the bladder is laid on top. The mould is closed and placed in an oven. Pressure is applied, forcing the bladder to expand. This squeezes and cures the pre-preg material in the shape of the tool. The mould is opened leaving a formed composite hose. The silicone bladder can be used multiple times.
High strength, low tear
UV, Ozone, and flame resistant
Seamed/joint sheets
Translucent
Smooth surface finish
Available in cured and uncured form
Fine fabric impression both sides
50 shore hard available
Fenner Precision produces silicone rubber sheeting used in manufacture of composite parts. We have an experienced team of engineers who can offer unique technical support.
Our material can be used in four main applications:
Vacuum Bag Forming
Laminating
Bladder Moulding
Hot Drape Forming
For more info, visit https://www.fennerprecision.com
Fenner Precision currently manufactures and supplies its Fenform™ high tear silicone sheeting to industries worldwide including automotive, aerospace, wind power, military, electronics, medical and marine.
Results obtained from the field have highlighted a great number of benefits to using the Fenner reusable material. These include high tear resistance, good flame resistance, competitive pricing, reusability, ease of repair, excellent UV and ozone resistance, durability over a wide temperature range (-40 to 200c), no risk of creasing (unlike nylon film), improved ergonomics and availability in grey or translucent (through which the resin flow can be observed).
FenFormTM Advantages:
• Reusable (environmentally friendly)
• Improved ergonomics for operators
• Excellent UV and ozone resistance
• Cost-effective alternative to disposable bags
• Good chemical resistance
• Highly durable over a wide temperature range (-40°C to 200°C)
• High tear resistance
• High elongation with low modulus
• Flame resistant
• Will not crease like nylon film
• Translucent sheeting so resin flow can be observed
• Reduced set-up times and costs
• Competitively priced
Fenner Precision is one of the few companies in the composite consumables market that produces and supplies silicone sheeting to the industry for vacuum moulding / release cloth processes and applications.
For more information, visit us at www.fennerprecision.com
Aerospace Applications
• Hot Drape Forming Presses;
• Vacuum bags for Resin-Infusion, and
• Rotor Blade manufacture.
Solar & Furniture Applications
• Equipment used for laminating furniture and forming Solar (PV) panels.
Automotive Applications
• Reusable bags for automatic bag furnaces, used for pre-laminating automotive windshields,
• New account – Simtech (Belgium).
Marine Applications
• Used to produce re-usable vacuum bags for boat manufacture.
Wind Energy
• Used to produce re-usable vacuum bags for polyester blades,
• Forming tables.
Industrial Applications
• Uncured FenForm material used for Bladder Moulding of composites
Fenner Precision’s engineered solutions can be “designed to fit your needs — exactly” for a variety of applications, including:
Wind Blades
Boats
Trains
Planes
Helicopters
And many more.
Contact Fenner Precision to discuss your specific application needs with one of our experienced engineers.
