Good Quality for Siway SV-602 Epoxy Structural Adhesive A/B Supply to Turkey
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for Good Quality for Siway SV-602 Epoxy Structural Adhesive A/B Supply to Turkey, Welcome friends from all over the world come to visit, guide and negotiate.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Describes how to use Mohawk Lacquer for Brass.
For more information, or to order:
https://amzn.to/1N8ynwG
Will keep your brass and brass plated metal surfaces brillant. Keeps metal bright and new looking. Prevents tarnishing, protects. It is a water clear, non-yellowing and durable coating. Adhesion is excellent to metal surfaces.
Directions
Note:
As the name suggests, this is a lacquer for metals such as brass. The lacquer contains an anti-tarnish additive to keep metals bright, clean and looking new longer.
Step 1
Make sure the parts to be sprayed are clean.
Step 2
Shake the can vigorously for at least one minute after the mixing ball rattles to ensure that the lacquer is mixed properly and to prevent clogging.
Step 3
To avoid overspray, if the part to be sprayed is attached to a piece of furniture such as brass drawer handles or hinges, remove the part before spraying.
Step 4
To spray, point the opening of the spray button toward the object, holding the can 12 to 14 inches away from surface. Then press the spray button firmly. Use steady even strokes while spraying. Several thin coats will result in a better finish than one heavy coat.
Step 5
Allow the coating to become tacky between coats.
Step 6
Generally 3 light coats are plenty for coating a metal part.
Step 7
When the can is empty, discard the can in a trash pick-up. DO NOT place it in a home compactor and do not burn it.
General sealants are not suitable for applications where high dynamics loads are encountered. This video explains why V-tech MS Industrial Adhesive Sealants are the right bonding and sealing solutions for different industrial applications.
For more information visit:
www.vitaltechnical.com
