Fixed Competitive Price Siway SV-602 Epoxy Structural Adhesive A/B to Rome Factories
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Fixed Competitive Price Siway SV-602 Epoxy Structural Adhesive A/B to Rome Factories, We warmly welcome friends from all walks of life to seek mutual cooperation and create a more brilliant and splendid tomorrow.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
https://fixmycabinet.com This method works for repairing loose MDF, Thermoroil or vinyl wrap cabinet door edges. These flexible plastic cabinet door edges can be re-glued with Elmers glue. Sometimes you can fix them without taking them off of the cupboards.
Here how to fix MDF doors that are coming unglued:
Materials Needed
1) Elemers Glue All
2) Damp sponge or rag
3) Screw driver
It will be easier to make the repair if you remove the doors from the cabinets. This is why you need the screwdriver. You do not have to do this though.
You can empty the drawers and remove them to fix the edges that are coming off.
Follow these steps:
-Gently pull the vinyl edge back enough to insert the tip of the glue bottle between the board and the vinyl.
-As you apply the glue, keep pressure on the edge in order to hold it back out of the way.
-Press the edge down with your finger or a damp sponge or rag.
-Wipe the excess glue off of the door with a wet cloth or sponge.
-Wait about twenty minutes and reapply pressure to the Thermofiol cabinet door edges.
-At this point the glue is stickier than when you first applied it on wet. This will cause any remaining loose vinyl to adhere to the edge of the door.
-Wait ten to twenty four hours and lightly sand the vinyl to ensure that someone won’t catch the edge with their fingers again a peal it off.
That’s how to repair an MDF vinyl cabinet door that has loose edges. It is possible to do this procedure while the doors are still on the cabinets, but it’s hard to squirt the glue on the bottom edges of the Thermofoil base doors.
