Factory supplied Siway SV-602 Epoxy Structural Adhesive A/B for Buenos Aires Manufacturers
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme for Factory supplied Siway SV-602 Epoxy Structural Adhesive A/B for Buenos Aires Manufacturers, For further information, please do not hesitate to contact us. All inquiries from you will be highly appreciated.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
This is the last of a two part video showing how I diagnosed and repaired an ATF oil leak between the 231 HD transfer case and the 46RE automatic transmission of a 1998 Dodge Ram. A link to part one is embedded in the first few seconds of this video, and here:
Both parts are lubricated with ATF+4, and the leak occurred at the weep hole between the two parts. Even in retrospect it is difficult to say which seal was leaking, or whether it was leaking at the bearing retainer plate. This type of leak may seem to be coming from the transfer case, since gravity and surface tension draws oil droplets down and back from the source of the leak. Ultimately I removed the transfer case and replaced the front seal of the transfer case, the rear seal of the transmission, and I refreshed an RTV seal at the front transfer case bearing retainer. Details of the repair are shown in a step wise fashion.
At the end of the video I describe how I will adjust the automatic transmission bands and change the transmission oil in a future video, link to come.
For further reference, a discussion thread and still photos of this repair are also available at dodgeforumsdotcom, here (replace each dot with a period)
dodgeforumdotcom/forum/2nd-gen-ram-tech/219788-transfer-case-seals-5dothtml
Special thanks to Sheriff420 for posting still photos taken during his repair of the same problem on the above forum.
This is a demonstration of amateur effort, offered in good faith for free but with no guarantees as to accuracy or safety. Auto repair education can be an inherently dangerous activity, even when best practices are followed. Any misadventure you encounter if you decide to repair your vehicle is your responsibility.
Royalty free music embedded in the video was obtained from Youtube creation tools “Sunday Stroll”.
Manual mold silicone rubber is mianly used for model design of manual mold,PVC plastic molds,cement products,low melting point alloymolds,handicrafts,stationery,large-scale sculpture,shoe sole molds,pad printing allocation,electronic equipment abtivibration.US$7.8 per kilogram.Details can visit www.szrl.net
https://www.facebook.com/mouldsilicone.
youtube:https://www.youtube.com/channel/UCed_-QO7UZneNYsWTxR1KFA.linkedin:https://www.linkedin.com/profile/view?id=189510785&trk=nav_responsive_tab_profile_pic.
twitter:https://twitter.com/Saminaray
email to ellarsmile05@gmail.com.
Thank you for watching !
