Factory source manufacturing SV-8000 PU Sealant for Insulating Glass for Morocco Factories
Short Description:
Description SV – 8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly. Where to use It is a two-component PU sealant that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU. Key Fe...
We always work as a tangible team to ensure that we can provide you with the best quality and the best price for Factory source manufacturing SV-8000 PU Sealant for Insulating Glass for Morocco Factories, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.
Description
SV – 8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly.
Where to use
It is a two-component PU sealant that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.
Key Features
1. High Modulus
2. UV resistance
3. Low vapor and gas transmission
4. Primerless adhesion to coated glass
Technical data sheet
| Test project | standards | Value |
| Sagging degree (mm) | ≤3 | 0 |
| Operating time | ≥30 | 30 |
| Thermal weight loss(%) | ≤10 | 2 |
| Durometer Hardness Shore A | 20-80 | 42 |
| tensile propcrties（MPA） | ＞0.4 | 1.0 |
| Bond damage area（5%） | ≤5 | 0 |
Certification
GB-24266-2009;
Color
Component A(Base) – White, Component B(Catalyst)- Black
Package
1. Component A(Base): (190L), Component B(Catalyst) (18.5L)
2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Is your toilet running? The most common cause of a leaky toilet is a toilet flapper valve that isn’t quite seating properly at the bottom of the tank. Replacing a toilet flapper valve is a relatively simple fix that could save you a pretty penny on your water bill.
First, it’s worth noting that not all flapper designs are the same. Before buying a replacement flapper, be sure to take the old one to the store with you so you can be sure the new one is a fit.
Once you have a compatible flapper ready to install, be sure to first shut off the water supply valve to the toilet tank. Remove the lid from the tank, and flush the toilet to remove as much water as possible.
You’ll note that the chain attached to the flush lever is the mechanism that lifts the toilet flapper, releasing water into the bowl. Disconnect this chain from the toilet lever. Then, pull the flapper off of the mounting pegs on either side of the overflow tube.
It’s important to be sure to wipe off the valve seat at the bottom of the tank to ensure a clean seal between the area and the new flapper valve, once installed. Next, go ahead and install the new flapper valve where the old one sat. Connect the chain back to both the flapper and the flush lever, then test the amount of slack you’ll need by pushing down on the flush lever a few times, watching to make sure the flapper comes up and down appropriately.
Lastly, turn the water supply back on and let the toilet tank re-fill with water. The new flapper valve should form a tight seal, fixing the leaky toilet that once was.
As always, if you’re having problems or need extra help, give Roto-Rooter a call or visit us a https://www.rotorooter.com
