Factory Price For SV-618 Acetic Glass Sealant to Vietnam Manufacturers
Short Description:
Description It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold. Where to use SV-618 is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painte...
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for Factory Price For SV-618 Acetic Glass Sealant to Vietnam Manufacturers, We are looking forward to establishing cooperative relationships with you. Please contact us for more information.
Description
It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold.
Where to use
SV-618 is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painted wood.
Key Features
1. 100% silicone
2. Easy to apply
3. Highly efficient and safe bactericide
4. Low VOC
5. Proven Performer
Technical data sheet
Technical data sheet for reference,
| Test standard | 1000 | |
| Appearance | ISO 11600 | Have no grain, no agglomerations |
| Extrudability，g/ml | ISO 8394 | 450 |
| Tack Free Time，min | ASTM C 679 | 20 |
| Density，g/cm3 | ISO 1183 | 1.0 |
| Slump，mm | ISO 7390 | 0 |
| Heat weight loss，% | ISO 10563 | 7 |
| Ultimate Tensile Strength，MPa | ISO 8339 | 0.4 |
| Ultimate Elongation，% | ISO 8339 | 150 |
| Ultimate Shear Strength, MPa | ISO 4587 | N/A |
Certification
JC/T885-2001 20LM; and GB/T1741-2007 Mildew Proofing Grade 0
Color
clear, black, silver gray, white
Package
300ml in cartridge * 24 per box
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
EXTERIOR FINISHING and PREP
STAIN-AND-CLEAR FINISH
The first coat should be a stain-and-sealer, a combination of stain and sealer, which colors the door and seals the surface. It is available in a wide range of colors. The stain-and-sealer should have an alkyd-resin base. Under no circumstances should a lacquer-based toner or any other lacquer-based finish be used on exterior doors.
The second and third coats (two top coats minimum) may be a solvent-borne (oil-base, alkyd resin-base, polyurethane resin-base) or a water-borne (latex resin-base) clear finish.
The advantages and disadvantages of solvent-borne vs. water-borne clear finishes are as follows:
Solvent-Borne Advantages: Faster drying, harder and more water resistant. May be applied under variable weather conditions. Disadvantages: Subject to ultraviolet degradation and not as flexible or durable as water-borne clear finish.
Water-Borne Advantages: Very flexible, greater ultraviolet resistance, and good exterior durability. Disadvantages: Cannot be applied below 50º F, long drying period required, and may not fully cure for several weeks. Water-sensitive until cure is complete.
Note: Do not sand between coats of clear latex. All stain-and-clear finishes will perform measurably better if protected from the direct effects of sunlight and weathering, and refinishing will not be required as frequently.
Introduction video to the benefits of Dow Corning 1299 Silicone Seam Sealer in fenestration and curtainwall assemblies.
To learn more, please visit: https://www.dowcorning.com/construction
