Factory Cheap Siway SV-602 Epoxy Structural Adhesive A/B to Madrid Manufacturer
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for Factory Cheap Siway SV-602 Epoxy Structural Adhesive A/B to Madrid Manufacturer, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
https://www.drenergysaver.com | 1-888-225-6260
A properly air sealed and insulated attic is the most important component of a green, energy efficient home. An inefficient attic causes energy waste in many ways.
Due to a physics phenomena known as the “stack effect”, the air inside a building moves upwards, towards the upper levels of the house. If the attic is unsealed, all the conditioned air that you paid to heat and cool, will leak into the attic and escape to the outside.
On hot days throughout the year, the roof shingles absorb a lot of the sun’s heat that then radiates into the attic, causing an attic to reach temperatures of up to 150 degrees! That heat will then be transferred to your living space and make your home uncomfortable and hard to cool.
Air ducts running through unconditioned and improperly insulated attics make for an even bigger source of energy waste. During the summer, metal ducts are conducting the air that you paid to cool through a scorching attic. The cool air is being re-heated before it reaches the rooms in your house! During the winter, the opposite happens. The hot air is reduced through the metal ducts that run through a freezing cold attic.
An energy efficient attic features a combination of thorough air sealing, a layer of insulation within the U.S. Department of Energy R-Value recommendations, and proper roof vents to prevent mold and ice damming. Air ducts that run through an unconditioned attic also need to be air sealed and properly insulated.
If you would like to make your home more comfortable and energy efficient trust your local Dr. Energy Saver home energy conservation specialist:.
Suppliers of industrial adhesive dispensing equipment and accessories.
