China Factory for SV-8890 Two-component Silicone Structural Glazing Sealant to Nigeria Importers
Short Description:
Description SV8890 is neutral curing, designed for glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal designed silicone sealant structure, excellent bonding performance of structure and the weathering resistance, after artificial accelerated weathering test, various physical and chemical properties have no obvious change in the sealant. When using, SV8890 with dedicated two-component glue machine constructi...
No matter new customer or old customer, We believe in long term and trusted relationship for China Factory for SV-8890 Two-component Silicone Structural Glazing Sealant to Nigeria Importers, Sincerely hope we are growing up together with our customers all over the world.
Description
SV8890 is neutral curing, designed for glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal designed silicone sealant structure, excellent bonding performance of structure and the weathering resistance, after artificial accelerated weathering test, various physical and chemical properties have no obvious change in the sealant. When using, SV8890 with dedicated two-component glue machine construction, two kinds of components in accordance with the provisions, mixing ratio after curing form elastomer.
Key Features
1. None sag
2. Adjustable working time
3. Excellent adhesion to most building substrates
4. High bonding strength and modulus
5.12.5%movement capability
6. Silicone durability
Basic Application
1.Glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal;
2.Insulating Glass of the second seal
3.Many other building and industrial applications
Technical data sheet
| Test project | Unit | value |
| Flow, sagging or vertical flow | mm | 0 |
| Operating time | min | 20 |
| surface drying time（25℃，50%R.H.） | min | 40-60 |
| Durometer Hardness | Shore A | 20-60 |
| At 23 ℃ maximum tensile strength elongation | % | ≥100 |
| Tensile strength（23℃） | Mpa | 0.9 |
| Tensile strength（90℃） | Mpa | 0.68 |
| Tensile strength（-30℃） | Mpa | 0.68 |
| Tensile strength（flooding） | Mpa | 0.68 |
| Tensile strength（flooding – ultraviolet） | Mpa | 0.68 |
| Bond damage area | % | 5 |
| Thermal aging（thermal weight loss） | % | ≤5 |
| Thermal aging（crack） | No | |
| Thermal aging（efflorescence） | No |
Certification
GB 16776
Color
Component A(Base) – White, Component B(Catalyst)- Black
Package
1. Component A(Base): (190L), Component B(Catalyst) (18.5L)
2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Next Battery Repair Video https://www.youtube.com/watch?v=hEESf-PoQu4
Previous Battery Repair Video https://www.youtube.com/watch?v=AS6Lyft8nfY
today i repaired this battery with 5 scoops of epsom salts in each cell.
and evidently shorting out the terminals helped the battery a lot.
Foundation Waterproofing.
Click here: https://amzn.to/1Pcgf3o .
I bought Rubberseal Roll On to coat the inside of a plywood vivarium (48″L x 28″width (depth) x 72″H). I needed water resistant top and sides so coated the top half with 1/32 of an inch (30 mil) and the lower half and bottom with a thicker coat of about 1/16 of an inch (60mil) to get a waterproof seal. I used a roller for the top sides and a brush to coat the corners. A brush will let you lay this on thick. I have some very thick areas on the bottom especially in corners where plywood meets the frame. Be aware this takes at least 72 hrs to dry and not be tacky to the touch and depending on thickness can take longer.Other products I used with Rubberseal Roll On:I was concerned that silicone will not adhere to the rubber but it worked beautifully. I used GE 100% Silicone I (black). I added cork sheets to the upper walls and coconut coir over the silicone in other areas.Great Stuff adhered with no problem also. And once carved and shaped you can use the black silicone to blend it in. I used globs on the walls and used them for plant anchor points.Liquid Nails will adhere to the rubber also, but takes a bit for it to get a good grip. you may need to tape things in place till the glue dries.Tips:you may scratch the rubber off the walls with decor (adding large branches and such) if you are not careful. Silicone can touch up these spots or if you have some RubberSeal left over you can re+touchup as needed.Wear gloves as this becomes extremely sticky and buy 3 or 4 cheap paint brushes or rollers for each day you are going to add a coat since the RubberSeal will dry to the brush/roller and make it unusable after a few hours.The one gallon can I bought was just enough for this size build.Read more ›.
1. Rubberseal Liquid Rubber Waterproofing and Protective Coating ++ Roll On
2. Rubberseal Liquid Rubber Waterproofing and Protective Coating ++ Roll On 5 GALLON BLACK
3. LastiSeal® Brick & Masonry Sealer (5+gal) | All Purpose Sealer for Brick, Concrete, Stone, & Porous Masonry |…
4. Ames BMX5RG Blue Max Liquid Rubber
5. S2000 Basement Wall & Floor Sealer
6. Hydro+Seal 75 Waterpoofing Epoxy 1 Gallon Kit + Resists over 40 psi, no VOC, Odor Free, Water+based Epoxy. Just…
7. Rubberseal Liquid Rubber Waterproofing and Protective Coating ++ Trowel On 1 Gallon
