Big Discount Siway SV-602 Epoxy Structural Adhesive A/B Export to Belize

Big Discount Siway SV-602 Epoxy Structural Adhesive A/B Export to Belize
  • Big Discount Siway SV-602 Epoxy Structural Adhesive A/B Export to BelizeBig Discount Siway SV-602 Epoxy Structural Adhesive A/B Export to Belize

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Big Discount Siway SV-602 Epoxy Structural Adhesive A/B Export to Belize, Any requires from you will be paid with our best attention!


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Waterproofing a watch is something that is not a DIY for at home unless you already have the tools and machinery. You can only waterproof a watch that is made to be a waterproof watch. You cannot waterproof a watch that was not intended for that.

    We show the waterproofing needed when changing the battery of the watch. The gasket needing to be replaced and oiled and the crown being oiled. We check to see if everything is ok in the waterproof tester capsule. We tested my watch up to 8 atmospheres/bars.
    We look for air, bubbles, anything that would show there is a leak from the crystal, crown, or case back. When everything looks perfect we take it out and re-insert the movement.

    We do NOT do the test with the movement inside, in the off-chance it is not waterproof and there is a leak. Because then the movement would be damaged. So we check for leaks without the movement.



    Learn more about TEROSON EP 5065 on www.carrepairsolutions.co.uk

    Developed for body repair, the 2 component epoxy TEROSON EP 5065 combines strong adhesion with excellent corrosion protection. It can be used on steel and aluminium without primer. The solvent-free adhesive is recommended especially to bond rocker panels, side walls and to bond roofs shown in this video.

    1:31 Preparing the new roof
    2:57 Body Frame Work

    Related Products

    WhatsApp Online Chat !