8 Years Manufacturer Siway MG PU FOAM to Czech Republic Factories

We consistently carry out our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for 8 Years Manufacturer Siway MG PU FOAM to Czech Republic Factories, Competitive price with high quality and satisfying service make us earned more customers.we wish to work with you and seek common development.

Description

MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;

Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;

Key Features

1. Noise silencing effect

2. Strong bonding strength

3. Water & weatherproof

4. Primerless adhesion to most building materials

Basic Application

1.Doors and Windows and wall body between the gap filling sealing, fixed bond

2.Language lab, studio, etc when decorating, gap to fill

Technical data sheet

Certification

JC 936-2004

Color

White

Package

750ml in Bottle * 12 per box

Shelf life

12 months

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

A weak link in the Dodge Grand Caravan, Town and Country, and other models is a plastic “Y pipe” heater hose fitting that begins to leak. The coolant drips directly onto the hot exhaust manifold pipe and vaporizes, resulting in coolant loss.

Often times the coolant loss will seem to be a mystery because there are no visual wet spots due to the instant vaporization. It is only when the leak becomes very bad that white smoke might be visible rising from under the hood, this is actually water vapor. This can be determined by the lack of a burning smell. The leaks often aren’t apparent unless you are looking at the fixture with the engine running at high RPM’s. The leak may be non existent or minimal at idle.

The fix is simple and inexpensive, $15 and 15 minutes. No previous auto repair experience should be necessary. You will need the following items.

Materials:
-Y-Pipe heater fitting Murray part number 84757 or equivalent.

https://www.oreillyauto.com/site/c/detail/MRY0/84757.oap

https://www.amazon.com/Four-Seasons-84757-Plastic-Splicer/dp/B000CSYSUS

https://shop.advanceautoparts.com/p/factory-air-heater-fitting-plastic-t-type-hose-splicer-84757/20891572-P

-3/4″ or larger hose clamps

-1 foot of 5/8″ Heater Hose

Tools:
-Something to cut the hose with
-Screwdriver to tighten the new hose clamps
-Pliers to help remove an old clamp

Procedure: (Follow at you own rise)

1. Some coolant will be spilled, but not much. You can drain it if you wish or just put a tray under the vehicle to catch it.

2. Install the heater hose on the singular end of the new Y-pipe with a hose clamp.

3. Use pliers to loosen the hose clamp where the old Y-pipe attaches to the motor.

4. The factory Y-pipe is held on with permanent clamps. Simply cut the two rear hoses as close to the Y-pipe as you can. Within an inch or so is good.

5. Twist the old Y pipe to break the bond where it is attached to the engine fitting, pull it off.

6. Put the new Y-pipe in place, attaching the two rear hoses. If you have trouble sliding them on then moistening and/or twisting it can help.

7. Cut the new heater hose to length and slide it onto the engine fitting.

8. Secure all fittings with hose clamps. Don’t overtighten.

9. Clean up any coolant to protect children, animals, and the environment.

10. Bask in the feeling of a job well done!

NOTE: Some people have reported using a T fitting instead of a Y shape. I don’t know if the Y shape makes any difference or not with the smooth flow of coolant. T fittings are available in metal which can reduce the potential of cracking but also introduces the possibility of corrosion. Be sure the metal will not interact with the coolant’s chemistry or with that of other metals on the vehicle.

I found this repair on the Tear it up, Fix it, Repeat blog at…

https://tearitupfixitrepeat.blogspot.com/2012/08/08-dodge-grand-caravan-antifreeze.html

Introduction to Pureshield

Pureshield is a fast growing company which deals with the sourcing, development, and distribution of high-end surface technology products. Pureshield Car Glass Sealant is a hydrophobic coating for Automotive Glass which enhance visibility by repelling water, dirt and oils making the glass easy to clean. Pureshield Car Glass selant is a 3 sachet set for Pre-Cleaning, Sealing and Polishing.

Preparing For Application

Car must be inside the garage and away from direct sunlight before the application .
Clean the outer glass surface to be applied thoroughly with water and make it dry
In hot conditions, when temperature is over 35 degree celcius, it is advisable to keep the temperature down by switching on the air conditioner in the car.
Wipe the glass clean with lint free cotton cloth, and ensure that all traces of water and dust are removed.

Application

Wear gloves provided in the set before starting application.

Pre-Cleaning,

Open the Cleaning Sachet(Sachet No:1), and use cleaning cloth to wipe clean the glass in uniform circular motions.
Ensure that the entire surface of the glass is wiped clean. Do not leave any gaps.
Wipe clean the glass, at least twice using both sides of the cleaning cloth.
This will help to remove any additional grease or any other oily substances which will not be cleaned with water alone.
Make sure that the Glass is completely dry before the next procedure.

Sealing

Open Sealant Sachet (Sachet No;2) and use sealing cloth to apply the sealant.
Start applying from the drivers side from top to bottom and continue this till the full Glass is coated with sealant solution. Use either side of the sealing cloth, this should be done with out wasting any time as the sealant will be lost due to evaporation. As soon as the first layer is applied start polishing the surface with the same sealing cloth. with medium pressure in circular motion again starting from the drivers side and continue to the other end of the glass.
Continue this for 8 to 10 rounds till the sealant sachet is completely dry. this is done to prevent the wastage and to use maximum number of nano particles are transferred to the glass from the sealant cloth.

Polishing

• Once polishing with the sealing cloth is over, then open the Polishing cloth(sachet no:3) and polish thoroughly in circular motion for about 10 to 15 minutes with medium pressure.

• Polishing helps to fix the nano particles to the car glass and absorbs the base from the glass , so polishing is very important step in the application of Pureshield Car Glass Sealant.

• After application the car must be inside the garage for minimum 3 -6 hours. It is advisable not to use the car for 12-24 hours to ensure maximum effect.

Maintaining the Glass

Do not use any chemicals such as de-icer to clean the glass. Use plain water only.
If the hydrophobic effect fades, clean with water and polish with lint free cotton cloth.
Hydrophobic effect fades over time, especially after first application. Repeat application within 4 to 6 months of first application will give a long lasting pureshield effect.