30 Years Factory SV-8800 Silicone Sealant for Insulating Glass Wholesale to Anguilla
Short Description:
Description SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material. Where to use It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU. Key Features 1. High Modulus 2. UV resistance 3. Low vapor and gas transmission 4. Primerless adhesion...
Our personnel are always in the spirit of "continuous improvement and excellence", and with the superior quality products, favorable price and good after-sales services, we try to win every customer's trust for 30 Years Factory SV-8800 Silicone Sealant for Insulating Glass Wholesale to Anguilla, We are confident that there will be a promising future and we hope we can have long term cooperation with customers from all over the world.
Description
SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.
Where to use
It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.
Key Features
1. High Modulus
2. UV resistance
3. Low vapor and gas transmission
4. Primerless adhesion to coated glass
5. 100% compatible to SV-8890
Technical data sheet
| Test standard | Test project | Unit | value |
| Before curing——25℃，50%R.H. | |||
| GB13477 | Specific gravity(After mixing) | 1.33 | |
| GB13477 | Operating time | min | 20-40 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 80-188 |
| corrosivity | No | ||
| 7 days after curing——25℃，50%R.H. | |||
| GB/T 531 | Durometer Hardness | Shore A | 40 |
| GB13477 | The tensile modulus at 12.5% elongation | Mpa | 0.18 |
| The ultimate tensile strength | Mpa | 0.92 | |
| GB13477 | Elongation limit (fracture) | % | 150 |
Certification
GB-24266-2009;
Color
Component A(Base) – White, Component B(Catalyst)- Black
Package
1. Component A(Base): (190L), Component B(Catalyst) (18.5L)
2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
MDRS-CAP Heat shrink cable end caps, with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc.
More details see www.shrinkmarket.com
Hongye silicone rubber Model No.: HY-6 series. Eg.: HY-628, HY-638.
Price: 5.98-9.28USD/KG, FOB, by sea/ Shenzhen port
Features of Hongye silicone for mold making:
(1) High tensile & tear strength
(2) High duplication times
(3) Low linear shrinkage
(4) Resistance to high-temperature
(5) Low shrinkage and non-deformation
(6) Resistance to acid-alkali and expansion
Operation instructions for silicon rubber mold making
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes. Otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed silicone mixture into the frame with original mold.
For more information, pls feel free to contact Miss Gloria.
Tel: +86-755-89948006
Fax: +86-755-89948030
Mob: +86-18938867584
E-mail: hyxf@szrl.net
Gmail: gloriachan0901@gmail.com
QQ: 1034964130
Welcome to our website https://www.szrl.net
