24 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B to United States Factory
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We consistently carry out our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for 24 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B to United States Factory, As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Factory Email: info@artglasscut.com
Specification:
Laminating width(mm): AK1350: 1240mm/AK1950:1830mm Roller upgrade: Cylinder linkage Power 2200w
Laminating thickness(mm) 30mm Roller heating: Internal heating by infrared Voltage 110/220v
Laminating speed 0-6m/min Preheating time 10-15min Weight 450kg
temperature range 120℃ Power consumption 0.8-1.0kw/h Host size600*2400*1100
Platform1800*2050*760
Machine configuration:
120W adjustable deceleration torque motor
* Pressurized cylinder automatic upgrade
* Foot switch
*Adaptive compression devices (origin)
*130mm diameter foreign thermo stable upper rubber roller
*Non-contact infrared temperature measurement system (origin)
Features
Improve quality
Infrared temperature control, temperature control is more precise
The film will be stickier and have better scalability and no air bubbles after heating.
Improve success rate
The take up part can be adjusted to improve the ductility of the coat without wrinkle.
Adaptive pressure device, and there is no need to frequently adjust the coating pressure.,
Improve efficiency reduces labor costs
Automatically reveal the base coat to save labor
Continuous laminating of the same thickness of the plates
Complete 360㎡/h by one or two people
Long machine life low maintenance costs
Foreign silicone rubber roller, thermo stable, good elasticity, anti-aging
Using an independent rubber band that can be replaced individually
A multi-purpose machine
Can be used for hot and cold laminating of pictures and other materials
Laminate the crystal and greatly reduce coating cost
All the flat plate materials can be laminated
Film color film、Glass sliding door sticker、Cabinet doors、Furniture porcelain plate、Plaster Board mural、Crystal plate、Corrosion circuit aluminum foil material such as flat.
Removable sub-platform, can be arbitrarily assembled, lengthened or shortened, the platform device is equipped with anti-walk ramp.
Cylinder pressure can be adjusted to cover the same thickness of the material ensures consistent pressure to improve product yield.
Improved cylinder pressure, cylinder automatic Dayou maintenance-free device, long life, high reliability.
Equipped with imported high-temperature silicone roller, greatly improve product yield and quality.
