23 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B Export to Portugal

As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for 23 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B Export to Portugal, We warmly welcome you to establish cooperation and create a bright future together with us

Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

Technical data sheet

The following data is for reference only and is not recommended for the specification

Certification

JC 887-2001

Color

Part A-Grey Paste/Part B-White Paste

Package

9kg/9kg per unit and 15kg/15kg per unit

Shelf life

12 months

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

Check out our blog for more details about this DIY!
(https://www.heywandererblog.com/2017/06/diy-stock-tank-pool-everything-you-need.html)
Instagram- https://www.instagram.com/heywanderer
E-mail- heywanderer@gmail.com

Things you will need:

- Stock tank
- Above Ground Pool Pump (https://www.amazon.com/gp/product/B005QIYMNM/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B005QIYMNM&linkCode=as2&tag=heywanderer-20&linkId=eb02a0f70f7346365cb3605526c762a1)
- Weatherproof Silicone Sealant (https://www.amazon.com/gp/product/B0000CBJ7W/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0000CBJ7W&linkCode=as2&tag=heywanderer-20&linkId=fed3bf25655f953f9dffe6f5a7125b41)
- Hole Saw with Arbor (https://www.amazon.com/gp/product/B00N41ECXI/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00N41ECXI&linkCode=as2&tag=heywanderer-20&linkId=53e5f5258cb8b72c0e3d0de148b30929)
- Plunger Valves (https://www.amazon.com/gp/product/B00EIMRZGS/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00EIMRZGS&linkCode=as2&tag=heywanderer-20&linkId=892e868c1267ff7ffd6407c597d557eb)”
- Pool Outlet (https://www.amazon.com/gp/product/B004S7QQ2M/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B004S7QQ2M&linkCode=as2&tag=heywanderer-20&linkId=108da486037248ed5399ade919e504e9)
- 1-3 Rubber Washers (or Gaskets) (https://www.intexcorp.com/10255.html)
- Strainer Nut (https://www.intexcorp.com/10256.html)

Other things you will need for maintenance:
- Chlorine Tablets (https://www.amazon.com/gp/product/B00PZZFQKY/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00PZZFQKY&linkCode=as2&tag=heywanderer-20&linkId=dd445281975e0f88f1840b8924aabc5c
- Floating Pool Dispensert (https://www.amazon.com/gp/product/B000P5A4R4/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B000P5A4R4&linkCode=as2&tag=heywanderer-20&linkId=8aa8479f61243a92ea124f1d9423f376
- Water Testing Kit (https://www.amazon.com/gp/product/B0038YL4M8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0038YL4M8&linkCode=as2&tag=heywanderer-20&linkId=b233a993b3d0993b7de815a339d3e7da

Step 1- Find a nice level area to lay the stock tank on. If the area where you have chosen isn’t level, use sand or rocks to build up whatever side needs it. It is very important that your stock tank be level so there aren’t any unexpected leaks.
Step 2- Cut holes in your stock tank. I’m not going to lie- this is a pain in the butt. We bought a hole saw with an arbor and it took two people to get through the metal. You will need two holes, one at the top and one at the bottom. In an above ground pool, these aren’t usually right on top of each other, but ours are. We haven’t ever seen this as a problem.
Step 3- Start assembling the parts. In the pool pump package there is a packet with instructions, warnings and troubleshooting. This packet proved to be vital in the setup of the pool. I did end up getting 2 gaskets for the bottom section (the drain section), one for the inside of the pool and one for the outside. It only says you need one for the inside, but this was causing a drip for us. I also put thread seal tape around the connections that were closest to the pool. There are a lot of connections, and each one has a gasket, so you could probably get away without the tape. I didn’t put it on all the connections, the only ones that really seemed to matter were the ones that are connecting the hoses to the pool.
Step 4- Apply silicone waterproof sealant around all crevices involving the input and output parts. I did this on the inside of the pool and the outside. And I applied it VERY HEAVILY and did two layers, allowing one to dry before the second was applied. Sealing these crevices is one of the most important parts. This is what is going to keep the water in the pool. Well all of these steps are leading up to keeping water in the pool, but if there is any chance that it’s going to be getting out, this is what will save you.
Step 5- Test for leaks. Before I added water to the pool, I took a water bottle and poured a good amount of water on the input and output parts. You could also just use a water hose. I would make sure the hose wasn’t on full blast. You don’t want to accidentally penetrate the sealant.
Step 6- Once you are sure there aren’t any leaks, fill the pool just above the bottom hole/output. Check again to see if any leaks have started. If there aren’t any, fill the rest of the pool up!
Step 7- Turn the pump on. Make sure both plunger valves are open/unlocked. When you first do this water may not come out of the output, but there is a solution! Twist off the knob on top of the filter pump to let some air out. Some water may escape too and that’s okay, just be ready to screw it back on as soon as the water starts coming out.

https://www.andysautosport.com/shopbybrand/omix-ada.html

We’re kicking off our Project YJ build by replacing our rusty old windshield frame with a new one from Omix-Ada. If you have any Jeep needs, Omix-Ada is sure to have the part with over 15,000 part numbers. This restoration starts at 1:25. From stock replacement parts to high-performance aftermarket accessories, Andy’s Auto Sport has what you need to get the looks and power your vehicle deserves.

Source: https://www.andysautosport.com

https://www.andysautosporttv.com

Contact Us 1(800) 419 1152 or by email info@andysautosport.com

Please feel free to rank our video, share it, or embed it!