2 Years\’ Warranty for SV-GT2000 High-speed rail subway silicone sealant to Milan Manufacturers
Short Description:
Description SV-GT2000 High-speed rail subway silicone sealant is a one-component, low modulus, neutral curing adhesive. For most of the stone, ceramic and cement components, can produce excellent adhesion Key Features (1) easy to use: can be used at any time out; (2) excellent thixotropy and extrusion, at any temperature (-40 ℃ to 100 ℃) can be extruded; (3) good adhesion, the stone, ceramics and cement components and other building materials with excellent adhesion properties; no poll...
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for 2 Years\’ Warranty for SV-GT2000 High-speed rail subway silicone sealant to Milan Manufacturers, Our final goal is "To try the best, To be the Best". Please feel free to contact with us if you have any requirements.
Description
SV-GT2000 High-speed rail subway silicone sealant is a one-component, low modulus, neutral curing adhesive. For most of the stone, ceramic and cement components, can produce excellent adhesion
Key Features
(1) easy to use: can be used at any time out;
(2) excellent thixotropy and extrusion, at any temperature (-40 ℃ to 100 ℃) can be extruded;
(3) good adhesion, the stone, ceramics and cement components and other building materials with excellent adhesion properties; no pollution of the porous material;
(4) excellent weather resistance, aging performance, excellent tensile and compression resilience, can carry ± 30% displacement capacity;
(5) neutral curing, stone, cement and other building materials without corrosive, to overcome the shortcomings of acid corrosion material.
(6) base modulus: passive deformation occurs when the role of moderate stress on the concrete substrate to ensure that the concrete surface is not destroyed;
(7) high elasticity high recovery capacity: can be repeated from the seams with the movement, fast response fast response, permanent deformation of small.
Basic Application
1.For high-speed rail track, airport runway, highway irrigation joints sealed, can withstand large displacement;
2.Can also be used for other concrete pavement sealing, subway engineering, tunnels, bridges and other projects sealed.
Technical data sheet
|
Test project |
Unit | value | ||
| surface drying time（25℃，50%R.H.） | min | ≤60 | ||
| Sagging(70℃) | vertical | mm | ≤3 | |
| Horizontal | mm | 0 | ||
| Mass loss rate | / | ≤5% | ||
| Elastic recovery rate | / | ≥80% | ||
| 100% tensile strength | 23℃ | MPa | ≤0.3 | |
| -20℃ | MPa | ≤0.3 | ||
| tensile strength | 23℃ | MPa | ≥1.0 | |
| -20℃ | MPa | ≤2.0 | ||
| 168 h after thermal aging (80 ℃) | MPa | ≥0.8 | ||
| 168 h after alkali treatment | MPa | ≥0.8 | ||
| Breaking elongation | 23℃ | / | ≥800% | |
| -20℃ | / | ≥600% | ||
| 168 h after thermal aging (80 ℃) | / | ≥600% | ||
| 168 h after alkali treatment | / | ≥600% | ||
| Bond strength | 23℃ | / | No damaging | |
| -20℃ | / | No damaging | ||
| 168 h after thermal aging (80 ℃) | / | No damaging | ||
| 96 h after immersion | / | No damaging | ||
Color
Black, White, Gray
Package
300ml in cartridge * 24 per box, 590ml in sausage *20 per box
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
https://minwax.tv/RemoveDust Remove dust and bubbles in your wood finish from DIY expert and author Bruce Johnson.
When you begin your finishing project, putting the first coat on is easy, but it’s hard to avoid dust. To solve this, start with a piece of 220 sandpaper, and give your piece a light sand to remove any small particles.
Then apply mineral spirits to a rag and wipe off your loose dust. At this point, you will have one coat of finish with some scratches in it.
Next, apply your second coat, Minwax Fast-Drying Polyurethane, with a natural bristle brush, not a foam brush. A foam brush leaves air bubbles in the finish. Brush on a nice, thin, even coat. Work it into the wood and then smooth it out. The polyurethane will stay sticky for about four to six hours, leaving time for dust to once again land.
Lastly, move up to a 600-grit black sandpaper with some mineral spirits and lemon oil added to it. This will grind off the dust that is in the top of the finish, but will not remove any finish. Wipe this off, and you’ve got a perfectly smooth, professional finish.
For more information on Minwax products and DIY tips, click the link above.
https://www.instagram.com/slikonkalip/
Whatsapp: 0543 291 61 86
Silikon Kalıp Silikon Kalıp Faturalı Satış ↔Kokulutaş ve Kalıp , Süsleme Malzemeleri , Akrilik Boya
