18 Years Factory offer Siway SV-602 Epoxy Structural Adhesive A/B to Armenia Factories

No matter new customer or old customer, We believe in long term and trusted relationship for 18 Years Factory offer Siway SV-602 Epoxy Structural Adhesive A/B to Armenia Factories, Inspired by the rapid developing market of the fast food and beverage consumables all over the world , We are looking forward to working with partners /clients to make success together .

Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

Technical data sheet

The following data is for reference only and is not recommended for the specification

Certification

JC 887-2001

Color

Part A-Grey Paste/Part B-White Paste

Package

9kg/9kg per unit and 15kg/15kg per unit

Shelf life

12 months

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

Step by step – how to replace a thermostat housing for the N14 engine used in Gen 2 2007-2010 turbo MINIs. Procedure is similar for N12/N18 engines (non-turbo, turbo/non-turbo 2011 and newer). Mechanics-eye-view of job from start to finish. R55 and R56 cars. Buy parts and install yourself to save money and have fun by working on your own MINI Cooper!

Buy the part here:

https://www.amazon.com/gp/product/B00IB2S6JG/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00IB2S6JG&linkCode=as2&tag=mimlif-20

You may need to do this if you have a P0597 “thermostat heater control circuit open” OBD diagnostic trouble or fault code (DTC), coolant leaking from the left/center of the engine and pooling on top of the transmission, engine takes long time to warm up/no interior heat, car is overheating even though fan is working, etc.

You may also be able to just replace the sensor on the top of the housing if you have the P0597 code, but replacing the entire housing is good insurance against a bad thermostat and preventative maintenance as many of these develop leaks as well as they age.
Save money and have fun by working on your own MINI Cooper!

See my other DIY auto repair videos:

https://www.youtube.com/playlist?list=PLhrpX5SoQ9uIfXvc5LUN21OpQq3LHcT9C

Thanks for watching and be sure to share, like, comment and subscribe! Check out all my videos: https://www.youtube.com/user/khammo01/videos?flow=grid&view=0

“DIY videos provided for reference/entertainment purposes only. Only work on your car if you have the right tools and are comfortable doing so. If in doubt, consult a professional. Mod MINI is not responsible for any ‘mistakes’ or ‘incidents’ arising out of your working on your own vehicle. Have fun and stay safe!” Follow #ModMINI on Twitter to get notified of new video uploads! https://twitter.com/ModMINIYoutube Thanks for watching!
Want to show your support for MOD Mini? Go to the channel page (https://www.youtube.com/user/khammo01) and click on the support button! Click here for Mod MINI Amazon Registry!

https://amzn.com/w/2PKRFN62X0RP8

CafePress store! https://www.cafepress.com/modmini

All heater mats are manufactured to conform to the EEC Low Voltage and EMC Directives and are CE marked accordingly. UL approval available.

The etched foil element type is created by acid etching a circuit in resistance alloy foil. This process ensures excellent circuit pattern repeatability and allows the design of complex heat distribution patterns within the heater area.

Etched foil elements are able to operate at very high watt densities, this is due to the large surface area covered by the foil track. The flat foil track also gives excellent uniformity and faster heat transfer resulting in longer heater life in high power applications.

Etched foil heaters are available in three types of insulation;

Silicone Rubber:
Has superb electrical insulating properties and a high temperature tolerance. The maximum continuous operating temperature is 200°C with short-term excursions to 230° C.

Kapton:
Polyamide is a thin lightweight organic polymer film that provides excellent tensile strength, tear resistance and dimensional stability. Ideal for applications requiring low outgassing or resistance to radiation, chemicals and solvents. Operating temperature range up to +260° C

Polyester:
Low cost alternative to silicone rubber and kapton. Polyester is suitable for low temperature applications up to 120° C.

The heaters for small batch runs can be produced as wire wound heaters but for larger production batches we would look to supply etch foil types.

Wire wound heaters are available from one off to larger batch quantities with almost no limit to design variations to satisfy customer specification. A high quality product at competitive prices coupled with fast delivery times all backed up by a full design and technical service to meet our customers’ stringent requirements.

All mats are manufactured to conform to the EEC Low Voltage and EMC Directives and are CE marked accordingly. UL approval available.

Silicone rubber because of its high temperature tolerance and superb electrical insulating properties is well suited to the production of heater mats. Heater mats are produced by laminating the evenly spaced resistance wires between two sheets of silicone rubber, reinforced with a glass textile to give improved mechanical strength.

These surface heaters are suitable for applications where precise heating is required. Fine resistance wires accurately and precisely positioned over areas of almost any shape or size. The close even spacing of the wires ensure a uniform heat distribution over the entire working area. The maximum continuous operating temperature for a silicone rubber heater mat is 200°C, allowing for a generous safety margin for short term over-temperature excursions as high as 230°C. Being thin and light weight, silicone rubber heater mats have a low thermal mass and therefore have rapid heat up characteristics and a fast response to temperature control.

Heater mats can be manufactured in almost any size and shape to suit the application, including holes and cut outs without disturbing the even distribution of heat. Also available is a range of in-built temperature limiters or temperature sensors to suit customer’s instrumentation.

Surface heaters can be supplied with an acrylic self-adhesive backing to allow for easy positioning and assembly. A separate silicone adhesive system is available if required. These heaters can also be manufactured with eyelets, straps, hooks or Velcro as further options for fixing. As for heaters which are not for static applications we can supply a more rugged silicone material to allow for repeated handling which will give a longer life.

As an addition to our wire wound heaters we provide etched foil heaters to meet the demands of the OEM market. This enables us to offer flexible heaters in polyamide and Polyester insulation. Available in higher power densities with an exceptionally uniform heat output. Custom designs to suit any requirement.