15 Years Factory SV-888 Weatherproof Silicone Sealant to Curacao Manufacturers

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for 15 Years Factory SV-888 Weatherproof Silicone Sealant to Curacao Manufacturers, If you are interested in any of our products or would like to discuss a customized order, please feel free to contact us.

Description

SV-888 silicone weatherproof sealant is one component, neutral cure silicone sealant, designed for glass curtain wall, aluminum curtain wall and building exterior design, has excellent weathering properties, it can form durable and most building materials, waterproof and flexible interface.

Key Features

1. 100% silicone

2. Medium modulus (25% movement capability)

3. UV resistance & weatherproof

4. Primerless adhesion to most building materials

Basic Application

1.All kinds of glass curtain wall weatherproof seal

2.For metal (aluminum) curtain wall, enamel curtain wall weatherproof seal

3.Joint sealing of concrete and metal

4.Roof joint seal

Technical data sheet

Certification

GB/T 22083-G-35；ASTM  C920

Color

Black, white, grey

Package

300ml in cartridge * 24 per box, 590ml in sausage *20 per box

Shelf life

12 months

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

Check out our blog for more details about this DIY!
(https://www.heywandererblog.com/2017/06/diy-stock-tank-pool-everything-you-need.html)
Instagram- https://www.instagram.com/heywanderer
E-mail- heywanderer@gmail.com

Things you will need:

- Stock tank
- Above Ground Pool Pump (https://www.amazon.com/gp/product/B005QIYMNM/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B005QIYMNM&linkCode=as2&tag=heywanderer-20&linkId=eb02a0f70f7346365cb3605526c762a1)
- Weatherproof Silicone Sealant (https://www.amazon.com/gp/product/B0000CBJ7W/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0000CBJ7W&linkCode=as2&tag=heywanderer-20&linkId=fed3bf25655f953f9dffe6f5a7125b41)
- Hole Saw with Arbor (https://www.amazon.com/gp/product/B00N41ECXI/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00N41ECXI&linkCode=as2&tag=heywanderer-20&linkId=53e5f5258cb8b72c0e3d0de148b30929)
- Plunger Valves (https://www.amazon.com/gp/product/B00EIMRZGS/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00EIMRZGS&linkCode=as2&tag=heywanderer-20&linkId=892e868c1267ff7ffd6407c597d557eb)”
- Pool Outlet (https://www.amazon.com/gp/product/B004S7QQ2M/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B004S7QQ2M&linkCode=as2&tag=heywanderer-20&linkId=108da486037248ed5399ade919e504e9)
- 1-3 Rubber Washers (or Gaskets) (https://www.intexcorp.com/10255.html)
- Strainer Nut (https://www.intexcorp.com/10256.html)

Other things you will need for maintenance:
- Chlorine Tablets (https://www.amazon.com/gp/product/B00PZZFQKY/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00PZZFQKY&linkCode=as2&tag=heywanderer-20&linkId=dd445281975e0f88f1840b8924aabc5c
- Floating Pool Dispensert (https://www.amazon.com/gp/product/B000P5A4R4/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B000P5A4R4&linkCode=as2&tag=heywanderer-20&linkId=8aa8479f61243a92ea124f1d9423f376
- Water Testing Kit (https://www.amazon.com/gp/product/B0038YL4M8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0038YL4M8&linkCode=as2&tag=heywanderer-20&linkId=b233a993b3d0993b7de815a339d3e7da

Step 1- Find a nice level area to lay the stock tank on. If the area where you have chosen isn’t level, use sand or rocks to build up whatever side needs it. It is very important that your stock tank be level so there aren’t any unexpected leaks.
Step 2- Cut holes in your stock tank. I’m not going to lie- this is a pain in the butt. We bought a hole saw with an arbor and it took two people to get through the metal. You will need two holes, one at the top and one at the bottom. In an above ground pool, these aren’t usually right on top of each other, but ours are. We haven’t ever seen this as a problem.
Step 3- Start assembling the parts. In the pool pump package there is a packet with instructions, warnings and troubleshooting. This packet proved to be vital in the setup of the pool. I did end up getting 2 gaskets for the bottom section (the drain section), one for the inside of the pool and one for the outside. It only says you need one for the inside, but this was causing a drip for us. I also put thread seal tape around the connections that were closest to the pool. There are a lot of connections, and each one has a gasket, so you could probably get away without the tape. I didn’t put it on all the connections, the only ones that really seemed to matter were the ones that are connecting the hoses to the pool.
Step 4- Apply silicone waterproof sealant around all crevices involving the input and output parts. I did this on the inside of the pool and the outside. And I applied it VERY HEAVILY and did two layers, allowing one to dry before the second was applied. Sealing these crevices is one of the most important parts. This is what is going to keep the water in the pool. Well all of these steps are leading up to keeping water in the pool, but if there is any chance that it’s going to be getting out, this is what will save you.
Step 5- Test for leaks. Before I added water to the pool, I took a water bottle and poured a good amount of water on the input and output parts. You could also just use a water hose. I would make sure the hose wasn’t on full blast. You don’t want to accidentally penetrate the sealant.
Step 6- Once you are sure there aren’t any leaks, fill the pool just above the bottom hole/output. Check again to see if any leaks have started. If there aren’t any, fill the rest of the pool up!
Step 7- Turn the pump on. Make sure both plunger valves are open/unlocked. When you first do this water may not come out of the output, but there is a solution! Twist off the knob on top of the filter pump to let some air out. Some water may escape too and that’s okay, just be ready to screw it back on as soon as the water starts coming out.

Caractéristiques: SOMAFIX MIROIR silicone monocomposant, neutre, excellente adhérence, longue durée de vie, durcit à température ambiante, sans solvant, ne s’affaise pas, durcit rapidement. Adhérence sur la plupart des matériaux, ne jaunit pas, ne rétrécit pas, peu odorant, application facile au pistolet, ne rouille pas le métal.
Applications: Construction de vitre et de fenêtre, isolation entre le verre et la structure de support, application industrielle, pour l’isolation autommobile, aéronautique, navale et la construction des
conteneurs. Utiliser aussi sur du béton, ciment et mortier.
Utilisation: Les surfaces doivent être propres, secs, dépoussiérés et dégraissés. Couper l’extrémité de la cartouche puis placer la dans le pistolet.
Appliquer sous forme de bande de façon continue et homogène. Nettoyer l’excès à l’eau savonneuse.
Securité: Tenir hors de portée des enfants. Eviter le contact avec les yeux. Peut causer des dommages au système respiratoire en cas d’inhalation sur une longue durée.
Tenir au sec et à l’abri de l’humidité. La date de fabrication et de péremption se trouve sur la cartouche.
Temps de conservation: 18 mois après la date de production.