14 Years Factory wholesale Siway MG PU FOAM for France Manufacturer
Short Description:
Description MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength; Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins; Key Features 1. Noise silencing effect 2. Strong bonding strength 3. Water & weatherproof 4. Primerless adhesion to most building materials Basic Application 1.Doors and Windows and...
With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for 14 Years Factory wholesale Siway MG PU FOAM for France Manufacturer, We look forward to establish a long-term business relationship with your esteem co-operation.
Description
MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;
Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;
Key Features
1. Noise silencing effect
2. Strong bonding strength
3. Water & weatherproof
4. Primerless adhesion to most building materials
Basic Application
1.Doors and Windows and wall body between the gap filling sealing, fixed bond
2.Language lab, studio, etc when decorating, gap to fill
Technical data sheet
|
Project |
Value |
||
|
Density, Kg/m³，Not less |
10 |
||
|
Thermal conductivity，35℃，W/(m·K) no more than |
0.050 |
||
|
Dimensional stability（23±2）℃，48，h no more than |
5 |
||
|
Operating temperature |
-10~+35℃ |
||
|
Optimum operating temperature |
+18~+25℃ |
||
|
Temperature range（After curing） |
-35~+80℃ |
||
|
Tensile bond strength kPa Not less |
Aluminum plate |
Standard condition，7d |
80 |
|
Immersion，7d |
60 |
||
|
PVC plate |
Standard condition,7d |
80 |
|
|
Immersion，7d |
60 |
||
|
Cement Plate |
Standard condition，7d |
60 |
|
|
Shear strength，kpa，Not less |
80 |
||
|
Foam expansion ratio，Not less |
Standard value-10 |
||
Certification
JC 936-2004
Color
White
Package
750ml in Bottle * 12 per box
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
After burning up 2 ESC’s due to water damage in my Graupner Hydrospeed RC boat I quickly determined that Liquid Electrical Tape (a derivative of Plasti Dip) just doesn’t cut it for waterproofing. I decided to spend a little more and buy what I think is a permanent solution for my third ESC so I can be done with this once and for all. The two products I used were 3M Scotch Weld DP-270 Potting Compound and Arctic Silver Alumina Thermal Adhesive Epoxy.
I did not work for me. 
Maybe I did it to long.
Instructions I found on the web after I did it.
Firstly you need to boil some water and make sure it is boiling hot.
Remove the rubber from the case and put in the boiling water for about 30sec – 1 min.
Remove the rubber from the boiling hot water and put on ice cold water for about 10-20 sec.
Dry the silicone case with paper towel or cloth and then I hope it will be good as new.
