11 Years Manufacturer SV-312 Polyurethane Sealant for Windshield Glazing for Importers
Short Description:
Description SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair. It allows a drive away time of 6 hours in vehicles with or without airbag. *Providing the ambient temperature is at least 23°C and relative humidity 50 %. At lower temperatures and humidities drive away time will be...
We enjoy a very good reputation among our customers for our excellent product quality, competitive price and the best service for 11 Years Manufacturer SV-312 Polyurethane Sealant for Windshield Glazing for Importers, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more detail
Description
SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.
It allows a drive away time of 6 hours in vehicles with or without airbag.
*Providing the ambient temperature is at least 23°C and relative humidity 50 %.
At lower temperatures and humidities drive away time will be longer.
Where to use
Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.
Key Features
a. Fast curing under room temperature, no sagging, solvent free
b. High bonding strength,
c. Good chemical and water resistance
d. No conductive
e. Excellent noise, vibration and impaction resistance
f. Automotive OEM quality
Technical data sheet
| Test standard | Test project | Unit | value |
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 30 |
| Curing speed | mm/24h | 3 | |
| GB/T 531.1-2008 | Durometer Hardness | Shore A | 45 |
| GB/T 2793 | Non-volatile components | % | ≥96 |
| GB/T 528 | The tensile strength | Mpa | 2.5Mpa |
| GB/T 528 | Elongation at break | % | ≥400% |
| GB/T 528 | Tear strength | N/mm | ≥5.0 |
Color
White, black, grey
Package
300ml plastic cartridges and 600ml in sausage
Shelf life
9 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Description:
liquid silicone rubber in our company, Shenzhen Hong Ye Jie Technology Co., LTD., is a kind of two part liquid silicone rubber. we have condesation cure liquid mold silicone rubber and addition cure liquid mold silicone rubber. For condesation cure liquid silicone rubber,Part A is white silicone and part B is catalyst or curing agent. when we use it to make the silicone mold for replicating the plaster products, concrete products or else, we need to mix part A and part B evenly, then it can be cured. For addition cure silicone ruuber, Part A and Part B are all called silicone, which is transluent, transparent and high transparent. we also need to mix part A and Part B evenly when we using it. The difference between addition cure silicone and condesation cure silicone is that the shrinkage and the temperature resistance of the addition cure silicone is better and other aspects. but the advantage of the condesation silicone rubber is that it has lower price but still with good quality.
Application :
plaster,gypsum,grc mold making
stone, artificial stone, culture stone, concrete, cement mold making
Candle mold making
sugar,cake,chocolate mold making,
Tyre mold making
Prototype
Lifecasting
Features:
Low shrinkage
High temperature resistance:100-150/150-220
Durable and can be used hundreds of times
Good tear and tensile strength
Not deformation
Adjustable the operate time and cure time as your demanding
Here is the video for your understanding, any question, let me know.
If you want to do it by yourself, contact JoJo for silicone order or free sample by email:hyxz@szrl.net or Mob/whatsapp:+8618938867553
This is the first in a series of videos documenting the construction of a puppet. This shows how to create the core from a pre-existing fiberglass mold. How to cast a silicone skin basically.
