100% Original Factory SV-9300 Fireproof silicone sealant for Vietnam Manufacturers
Short Description:
Description SV – 9300 Fire resistant silicone sealant is a one-component, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions. Where to use It is an ideal material designed for use in fire-stop systems for through penetrations and joints. This product excels in applications where greater water resistance is required e.g. ...
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for 100% Original Factory SV-9300 Fireproof silicone sealant for Vietnam Manufacturers, Adhering to the business principle of mutual benefits, we have won good reputation among our customers because of our perfect services, quality products and competitive prices. We warmly welcome customers from home and abroad to cooperate with us for common success.
Description
SV – 9300 Fire resistant silicone sealant is a one-component, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.
Where to use
It is an ideal material designed for use in fire-stop systems for through penetrations and joints. This product excels in applications where greater water resistance is required e.g. curtain wall, building facade, expansion/pipe and cable joints.
Key Features
1. 100% silicone
2. Excellent weatherproofing and waterproofing
3. Low gas transmission rate
4. With highly efficient redundant
Basic Application
1.Building fire seam sealed
2.Building façade
3.cable joints
Technical data sheet
| Test standard | Test project | Unit | value |
| Before curing——25℃，50%R.H. | |||
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | Operating time | min | 15 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 40-60 |
| Sealant curing speed and operating time will have different with different temperatures and temperature, high temperature and high humidity can make sealant curing speed faster, rather low temperature and low humidity are slower.21 days after curing——25℃，50%R.H. | |||
| GB/T 531.1-2008 | Durometer Hardness | Shore A | 20-60 |
| GB13477 | 60% elongation of cementation | no damaging | |
| GB13477 | Elongation limit | % | 120 |
| GB/T 24267 | Sealant level | 20HM | |
| GB/T 24267 | Fire prevention level | FV-0 | |
Certification
GB/T 24267-2009
Color
Black
Package
300ml in cartridge * 24 per box
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
FUJIK Silicone Thermal Glue (50ml Grease-Like)
StoneTech™ Heavy-Duty Exterior Stone & Masonry Sealer from Bane-Clene provides “natural look” protection for exterior natural stone & masonry. Formulated with advanced, water-based, silicone technology that protects against water-based stains. Lasts for years even under extreme sunlight.
DIRECTIONS FOR USING HEAVY-DUTY EXTERIOR STONE & MASONRY SEALER:
• Always test in a small inconspicuous area with a 24-hour cure time to determine the ease of application and desired results.
• Allow new grout installations to cure for a minimum of 72 hours prior to application.
• Make sure surface is clean, dry, and free of waxes and coatings and loose debris.
• Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.
• Liberally apply 1-2 coats with a brush, paint roller, or solvent resistant low pressure sprayer. On porous surfaces the first coat will soak in considerably. Additional coats will cover approximately double the previous coat.
• Highly porous material will need longer cure time between coats. Allow time to saturate, about 5-15 minutes per coat. Wipe off any excess residue prior to complete drying.
• If, after drying, a light haze appears, lightly dampen a clean towel with Heavy Duty Exterior Stone & Masonry Sealer and wipe surface to remove.
• Clean equipment with mineral spirits or Saf-T-Solv™.
• For maximum oil and water repellency, allow Heavy Duty Exterior Stone & Masonry Sealer to cure for 24 hours, then apply two coats of StoneTech Professional Impregnator Pro™ as per label directions.
• Do not walk on surface for a least 4 hours.
• Full cure is achieved in 24-72 hours.
• Coverage: Approximately 200 – 1,200 sq. ft. per gallon.
• Expected Wear (with proper care): 5-10 years on exterior surfaces. • For optimal results, reapplication is recommended every 3-5 years for exterior surfaces or 5-7 years for interior applications.
• Routine Cleaning of Exterior Stone, Brick and Masonry: To maintain the stone’s natural beauty, clean surface as needed with StoneTech Professional Revitalizer or All Purpose Stone Cleaner.
Heavy Duty Cleaning of Exterior Stone, Brick and Masonry: Pre-clean with StoneTech Professional Klenz All™ Heavy Duty Stone, Tile and Grout Cleaner.
——————————————————
BANE-CLENE INFORMATION & CATALOG REQUEST:
https://www.baneclene.com/contact/Inqform.aspx
——————————————————
Bane-Clene® Corp.
3940 N. Keystone Ave.
Indianapolis, IN 46205
800-428-9512
https://www.baneclene.com
——————————————————
