10 Years Factory SV-312 Polyurethane Sealant for Windshield Glazing for Barcelona Factories
Short Description:
Description SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair. It allows a drive away time of 6 hours in vehicles with or without airbag. *Providing the ambient temperature is at least 23°C and relative humidity 50 %. At lower temperatures and humidities drive away time will be...
We enjoy a very good reputation among our customers for our excellent product quality, competitive price and the best service for 10 Years Factory SV-312 Polyurethane Sealant for Windshield Glazing for Barcelona Factories, Standing still today and looking into the future, we sincerely welcome customers all over the world to cooperate with us.
Description
SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.
It allows a drive away time of 6 hours in vehicles with or without airbag.
*Providing the ambient temperature is at least 23°C and relative humidity 50 %.
At lower temperatures and humidities drive away time will be longer.
Where to use
Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.
Key Features
a. Fast curing under room temperature, no sagging, solvent free
b. High bonding strength,
c. Good chemical and water resistance
d. No conductive
e. Excellent noise, vibration and impaction resistance
f. Automotive OEM quality
Technical data sheet
| Test standard | Test project | Unit | value |
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 30 |
| Curing speed | mm/24h | 3 | |
| GB/T 531.1-2008 | Durometer Hardness | Shore A | 45 |
| GB/T 2793 | Non-volatile components | % | ≥96 |
| GB/T 528 | The tensile strength | Mpa | 2.5Mpa |
| GB/T 528 | Elongation at break | % | ≥400% |
| GB/T 528 | Tear strength | N/mm | ≥5.0 |
Color
White, black, grey
Package
300ml plastic cartridges and 600ml in sausage
Shelf life
9 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Upgrade your bike by fitting tubeless tyres. They’re lighter and less likely to puncture.
Click here to subscribe to GMBN: https://gmbn.eu/Subscribe
Tubeless tyres have many advantages, including the fact that they’re really difficult to puncture. They can also be a bit lighter than standard setups.
Here’s our guide to fitting a tubeless system using rim tape and sealant (such as Stan’s) and presuming that you have a tubeless ready tyre. This isn’t the easiest job in the world – you’ll really need to put your back into it to get the tyre to seat – but we guarantee that the results are worth it.
Click here to buy GMBN T-shirts, hoodies and more: https://gmbn.eu/shopgmbn
If you want to contribute captions and video info in your language, here’s the link to help out
Bas Seldenrijk uit Groningen kwam op 8 maart van dit jaar hard ten val in de Ronde van Zuid-Holland. Hij liep botbreuken op in zn gezicht en werd vanwege een hersenkneuzing in coma gehouden, balancerend op het randje van leven en dood. Bijna zes maanden later fietst hij weer.
Bezoek ook onze website: https://www.rtvnoord.nl/
Link naar video: https://www.rtvnoord.nl/?v=30592
